Awapow Tuya WiFi Surveillance Door Camera Visual Intercom Digital Doorbell Camera PIR Motion Detection Wireless Video Door Bell

Door Camera / with EU Plug

€81,93

€81,93 €81,93

Awapow Tuya WiFi Surveillance Door Camera Visual Intercom Digital Doorbell Camera PIR Motion Detection Wireless Video Door Bell

€81,93

€81,93 €81,93

SPECIFICATIONS

Alarm: Yes

Brand Name: NONE

Certification: CE,FCC,RoHS

Choice: yes

Communication Interface: WireLess

Display: Color

Feature: Photograph,Video

High-concerned chemical: None

Item Type: Audio Doorbell

Itercom: Yes

Origin: Mainland China

Power: Electric Supply

Power Source: Electric Supply

Smart home platform: Tuya

Awapow 4.3inch Wireless Doorbell Tuya Smart Digital Door Camera WiFi Peephole Viewer 1080P PIR Motion Detection Door Viewer

Product Features::

● 1080P HD video doorbell camera with 4.3-inch display

● Use microwave radar to detect the alarm, as long as someone is standing in the doorway, the alarm will be triggered

● Built-in 6000mAh rechargeable battery and 3m 5V 2A USB cable power supply, with low battery alarm function

● When someone stays at the door, the camera will capture and record the video at the same time, you can view it in the playback (this function requires a memory card)

● One-way intercom, on the cell phone users can only hear the visitor's voice, can not directly communicate with the visitor

● Clear night vision. Provide day and night monitoring

● PIR Motion Detection. 120° Viewing Angle, APP will push notification when peephole camera detects a person's movement

● Smart Playback. If you insert a micro SD card, you can view the video recordings in "Smart Life" or "Tuya Smart" at any time.

Specifications:

Camera Viewing Angle: Wide Angle 120°

Memory card: Maximum support 128Gb

Wifi Mode:802.11 b/g/n

Input:5V/2A

Applicable door thickness: 35mm-115mm.

Applicable door aperture diameter:15mm-36mm.

The memory card format used in the doorbell is FAT, and the transmission rate needs to reach C10.

Certification: CE ROSH FCC

Charging interface: Type-c

Package size: 238*121*65mm

Charging cable length: 3m

Power supply: rechargeable 6000mAh lithium-ion battery (built-in

Kind reminder:

1. Charging cable 3m long, charging customers are advised not to remove the host, charging directly on the door (remove the host accidentally will break the cable)

2. Can not connect to the network, please check whether the network is 2.4G, enter the password is correct

3. Before installing, please charge it fully.

PIR Night Vision

When at night,the doorbell camera will automatically switch to the Light-on-dark color scheme.Even at night, you can monitor the outdoor environment.

Motion detection

When motion detection is activated, the camera will take a photo or record a video automatically.

Motion detection effective distance：1-2m.

Microwave Radar Human Body Detection

Once someone stays in front ofthe door for a long time and triggers the microwave radar sensor,It will immediately capture and push alarm information to the phone.

Support TF card,up to 128G Real time recording: The screen is constantly working, monitored 24 hours a day,and playback can be watched anytime,anywhere Event recording:Automatically capture and record when there is a change at the entrance,and remotely push messages

Reachargeable 6000mAh Lithuim Battery With 5V 2A USB Charging Cable

Built-in 6000 mAh rechargeable large capacity battery and USB port charging. Installation steps

Stpep 1:Select a screws that fit the thickness of the door and insert the bolt Machine

Stpep 2:Pass the cable through the peephole outside the door

Stpep 3:After straightening out the lines as shown in the figure;Thread the screws through hang plate

Stpep 4:Tighten the fixed screws in sequence

Stpep 5:Buckle the doorbell wire in the correct direction

Stpep 6:Install the doorbell host on the hanging plate

4.3inch Tuya Doorbell Camera Q&A:

Q1: Why is the doorbell host unable to display images when turned on?
--Inserting cable while the host is turned on cannot display images. Please insert the cable while the host is turned off; If the ribbon cable is damaged due to creases, the host will also be unable to display images. The cable of the peephole can be replaced. You can contact customer service to replace the cable

Q2: What specification of charger does the doorbell host use?
--The doorbell host needs to use a low-power 5V2A charger, and using a fast charger will burn out the doorbell host. The manufacturer only equipped a charging cable without a charging head. If you need a European or American standard 5V2A charging head, please contact customer service

Q3: Why is the peephole camera unable to connect to WiFi?
--Please ensure that your phone is connected to a 2.4G network. The 5G network cannot connect to the doorbell. Please enter the correct password during the connection process. When the camera scans the QR code on the phone, you need to press and hold the power button on the doorbell host to reset the doorbell and keep it waiting for WiFi connection.

Q4: Why does the peephole camera disconnect from the phone?
--Unstable network signals may cause them to disconnect. You can delete connection records on your phone and reset the doorbell to reconnect them.

Q5:Why is the power consumption of the doorbell host very fast?

--The power consumption of the doorbell host depends on the frequency of use of the doorbell host. You can lower the sensitivity of motion sensing in the tuya app to put the doorbell host in low-power mode.

Q6：Why can't the camera store videos?
--The doorbell needs to use a memory card with the format FAT, and its transmission rate should reach C10. If someone stays at the door for a long time, the camera will record a video and store it in the memory card. You can view it in the playback section of the tuya aap page on your phone. The camera is unable to record videos 24 hours a day.